Ithaca model 49 gun broker serial#

This is how I take mine down shown on a X5 factory cut away I picked up a few years ago.

The break down is pretty much the same for both models. Next remove the 2 screws holding the trigger assembly. Next drift out the roll pin holding the breech plug. The plug can then be removed out of the back of the receiver followed by the bolt guide rods and springs. The bolt charging handle will need to be removed before the bolt can be removed out the back. As I recall it should pull out like that of a semi-automatic shot gun including the Ithaca 51. If you are going to remove the bolt hold open be gentle they are known to break and hard to find. The trigger group can be taken down further. Rick- there TWO Ithaca Model 49 lever actions- single shot and repeater. I had problems with a X5 prone to miss fire. Rex, I have used a Stanley nail set and a flat tipped punch to iron out firing pin dings. On that little Ithaca, problem is the extractor is worn, Cheap metal. And it is a ROYAL PITA to take those apart (and put. I replaced the hammer spring and that solved the problem. Last I checked Numrich did not have any in stock I had to rob the one out of cutaway. Working a classic lever action rimfire rifle. Good luck, ask if you have more questions. Hollensen I recently had a customer asking to have an old Ithaca Model 49.

Ithaca model 49 gun broker serial#

Sellers Description: LSB: 161013SB04 Make: Ithaca Model: M-49 Serial Number: 257031 Year of Manufacture: 1968-1976 Caliber. #Ithaca model 49 firing pin serial#Дў2 lever-action single-shot rifle refurbished. 22 CAL MAGNUM RIM FIRE ONLY / ITHACA GUN CO., INC.Дў2 Magnum Action Type: Single Shot, Lever Actuated Falling Block Rifle with Exposed Hammer Markings: The left of the barrel is marked M-49. It was in fair shape, very dirty with a few dings and dents, but all of the parts were accounted for.